DYNA IMPLANTDyna Implant System is the complete implant system made totally in Holland
able to solve wide range of implant-related clinical indications. It has been developed in
close cooperation with the Open University of Amsterdam and the University Leiden and it
was the first system with HA coated implants commercially available on the world market.
Years of clinical experience supported by
numerous studies carried out on different universities have proved that proposed by Dyna
Dental Engineering concept of simplified implantation technique leads to excellent and
predictable results.
The system combines flexibility, simplicity and reliability with cost effectiveness and high
quality of all used materials. It meets both demands of surgeons and patients and allows to
look forward to undisturbed functioning and long term success.
Fixture
The implant is HA coated full titanium cylinder with reversed screw designed to give
secure mechanical fixation and load distribution. It is two a stage, push-in type implant.
HA covering promotes the process of bone ingrowth not only from the bone side but from the fixture
surface as well.
The implant is available in four diameters (including Ø3mm), and different lengths allowing for
using the system in situations, where the amount of available bone is limited.
Every implant is totally covered (without polished collar) with a thin layer of hydroxylapatite, which
creates anchoring surface favouring direct bone apposition.
Every implant is supplied together with the covering screw in sterile double peel-pouch type
packaging
The implant is HA coated full titanium cylinder with reversed screw designed to give
secure mechanical fixation and load distribution. It is two a stage, push-in type implant.
HA covering promotes the process of bone ingrowth not only from the bone side but from the fixture
surface as well.
The implant is available in four diameters (including Ø3mm), and different lengths allowing for
using the system in situations, where the amount of available bone is limited.
Every implant is totally covered (without polished collar) with a thin layer of hydroxylapatite, which
creates anchoring surface favouring direct bone apposition.
Every implant is supplied together with the covering screw in sterile double peel-pouch type
packaging
Abutment
The abutment is an all-in-one element without separate fixation screw.This solution simplifies the procedure and necessary instrumentation.
There are several types of abutments for all types of prosthetic constructions
available.
Instruments
Instruments manufactured by Dyna Dental BV
are designed to be simple and universal. Only a limited
number of instruments are sufficient to perform surgery
phase and complete prosthetic part. Selection of drills
corresponding with the diameters and lengths of implants
enables precise preparation of the implant bed in a timesaving
and possibly atraumatic manner.
All instruments, however, should be regularly checked
by the user to see that they are working properly.
are designed to be simple and universal. Only a limited
number of instruments are sufficient to perform surgery
phase and complete prosthetic part. Selection of drills
corresponding with the diameters and lengths of implants
enables precise preparation of the implant bed in a timesaving
and possibly atraumatic manner.
All instruments, however, should be regularly checked
by the user to see that they are working properly.
Dyna philosophy
Dyna Dental BV is present on the dental market since 1984. During this time a special
philosophy was formulated. It can be seen as a principle for the use of Dyna System.
Besides the well accepted rule of using the biggest implant that can be placed in all situations
it is important to determine, before implantation, the type of the prosthetic construction you wish to
construct.
Indeed, there are numerous possibilities but, in fact, the real choice you have to make is the
choice between the removable, and not removable prosthesis.
1601-01.04 Dyna Pushin Implant Manual GB 17 / 144
removable prosthesis can be taken out of the patients mouth in a simple manner by the patient
himself or by the dentist.
By using the Dyna System it is possible to construct a full range of overdentures. The following
anchoring possibilities are available:
-the magnet
-the bar
-the ball
not removable prosthesis is a construction that can’t be removed by the patient and the dentist
needs special prosthetic instrumentation. In general cemented or screwed retained crowns and
bridges are the most popular.
Example abutments for this type of constructions are:
-bar abutment
-memory abutment
-fixed crown abutment
Every construction should be scrupulously analysed and a full individual treatment plan prepared.
For removable prostheses we recommend using implants
-with diameter smaller then Ø4.0;
whereas for non removable prostheses implants
-bigger or equal Ø3.6 [only in exceptional situations is it allowed to use Ø3.0 implants but
with the length not shorter than 13mm]
For almost all prosthetic constructions Ø3.6 implant is the most universal one;
Ø3.0 6mm-long implant is available only for maxillo-facial purposes
Dyna Dental BV is present on the dental market since 1984. During this time a special
philosophy was formulated. It can be seen as a principle for the use of Dyna System.
Besides the well accepted rule of using the biggest implant that can be placed in all situations
it is important to determine, before implantation, the type of the prosthetic construction you wish to
construct.
Indeed, there are numerous possibilities but, in fact, the real choice you have to make is the
choice between the removable, and not removable prosthesis.
1601-01.04 Dyna Pushin Implant Manual GB 17 / 144
removable prosthesis can be taken out of the patients mouth in a simple manner by the patient
himself or by the dentist.
By using the Dyna System it is possible to construct a full range of overdentures. The following
anchoring possibilities are available:
-the magnet
-the bar
-the ball
not removable prosthesis is a construction that can’t be removed by the patient and the dentist
needs special prosthetic instrumentation. In general cemented or screwed retained crowns and
bridges are the most popular.
Example abutments for this type of constructions are:
-bar abutment
-memory abutment
-fixed crown abutment
Every construction should be scrupulously analysed and a full individual treatment plan prepared.
For removable prostheses we recommend using implants
-with diameter smaller then Ø4.0;
whereas for non removable prostheses implants
-bigger or equal Ø3.6 [only in exceptional situations is it allowed to use Ø3.0 implants but
with the length not shorter than 13mm]
For almost all prosthetic constructions Ø3.6 implant is the most universal one;
Ø3.0 6mm-long implant is available only for maxillo-facial purposes
Important features of the system
Dyna Implant System has following advantages:Individual choice of implants
Dyna Implant System has following advantages:Individual choice of implants
- Wide range of indications
- Standardized instrumentation
- Standardized implant design
- Simple surgical and prosthetic procedure
- Time saving.
I started on COPD Herbal treatment from Ultimate Health Home, the treatment worked incredibly for my lungs condition. I used the herbal treatment for almost 4 months, it reversed my COPD. My severe shortness of breath, dry cough, chest tightness gradually disappeared. Reach Ultimate Life Clinic via their website at www.ultimatelifeclinic.com I can breath much better and It feels comfortable!
ReplyDelete